Skip to main content
BLACKCOMB 5.1 Rack
LUMINOR's line of rack-mounted UV water treatment systems offer the convenience of an all-in-one package making installation a simple "in & out" connection. Designed to treat flow rates of 8 & 15 gpm, LUMINOR's rack-mounted UV filtration systems provide the required 5 micron pretreatment with the option of a full-flow carbon filter to treat taste and odour. Installation of a UV water filtration system has never been easier with a design that allows for feedwater to enter the filters from either the right or left side of the unit.
Based on LUMINOR's groundbreaking modular UV water treatment systems, the rack-mount UVs offer the flexibility of being "factory ready" to accept a UV intensity module in the future if desired. The BLACKCOMB plug and play platform has a controller with a colour user interface giving a multitude of screens displaying diagnostics, status, warnings and also QR codes for a quick link back to LUMINOR's website. Combine this with the capability to fully customize the colour screens with your own dealer information, or a different language*.
*Optional Custom Dealer Programmer is required. Contact factory for further information.
Unboxing the BLACKCOMB UV Rack System
Home screen
Lamp life remaining screen
Lamp expiration screen
Unsafe water screen
QR code screen
UV intensity screen
Optional Equipment Modules
Solenoid Module (MOD-SOL1)
- Allows for a solenoid connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products (will work on lamp failure only on LUMINOR 5.1 systems)
- Customer simply needs to purchase a NORMALLY CLOSED line voltage solenoid valve and affix the module’s supplied bare lead cord to the solenoid valve
- Connect power cable to electrical outlet and the other lead to the “future-proof” expandability port on the controller
4-20 mA Module (MOD-420)
- Allows for a 4-20mA connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
- This device will allow for a 4-20mA signal transfer of the UV output to a remote device such as a data logger or computer
- Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system
- No wire is supplied with this system, however 16-22 AWG is required
Remote Alarm (Dry Contacts) Module (MOD-RAM)
- Allows for a remote connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
- Allows for the remote installation of alarms, lights, PLC input, data logger, flow control, etc.
- Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system
- Supplied with three screw terminals (NO, NC & common) to connect to the receiving end of the dry contacts
- As the distance required is unknown, no wire is supplied with the system, however 16-22 AWG is required
SHERPA
- Wireless remote monitoring within the home….works on all LUMINOR (both 5.1 and 6.1) products
- Integral audible alarm and visual indicators for “GOOD”, “CAUTION”, and “ALARM” conditions
- Hard wire option only (wall wart) (battery option to follow)
- Supplied with both the receiver and transmitter which is connected to the IEP port of the controller as are other modules
- Flexible mounting configurations
- Can install up to 5 receivers per transmitter
Module Splitter
This module helps organize all the modules connected to BLACKCOMB 5.1/6.1 systems. Up to 3 modules, including sensors, can plug into the MOD-SPLITTER at once. Managing modules becomes easier as they are all plugged into one, central location.
UV Concierge Module (MOD-APP)
• Integrated WiFi solution for WEB, ANDROID, and iOS (Apple)
• GUI interface matches current UV display for brand recognition
• Easy set-up and login with integrated QR codes
• Data logging capabilities (i.e. UV output over time)
• Safe & protected, cloud-based data management
• Monitor just one system, or ALL the systems that you may service
• FCC compliance
Ultrasonic Flow Meter Module
LUMINOR’s ULTRASONIC FLOW METER provides accurate, real-time flow monitoring using a technology that provides failsafe operation. When the system senses “no-flow” or "low-flow" conditions, a signal is sent to the main controller and automatically reduces the power output to the UV lamp, thereby reducing the overall power consumption. Benefits include energy savings, reduced quartz sleeve fouling and cooler operating temperatures.
Dealer Programming Module
As a dealer or distributor of UV systems, you realize the importance of making sure that your customers replace their UV lamps on a regular basis. Other systems come with lamp change reminders, but they do not ensure the repeat business comes back to you!
LUMINOR's BLACKCOMB line of UV systems come with the industry's first Dealer Programming Module. This module allows you to customize the controller's display in the field!
